Loaded Longboards Dervish
With a lower center of gravity and a torsionally stiff design, the Dervishes are built to hold an edge and maximize energy return.
A drop-thru carver designed to work with most reverse kingpin geometry trucks and 70mm+ wheels. Has a small nose and tail for manual and shovit tricks.
Construction
Epoxy and Tri-axle fiberglass sandwich a vert-lam Bamboo core, pressed into concave and convex cambers for liveliness, responsiveness and high energy potential.
Keep in mind that a softer flex pattern will give you more control and tighter turns at a wide range of speeds, but tend to lose stability slightly at higher speeds. Stiffer flex means more energy potential and more stability at higher speeds, but will not be as forgiving and lively when cruising.
Enjoy !
| Set up 1 |
Gullwing Charger Trucks (180mm),
Abec 11 BigZigs 75mm - Lime, Lemon or Pink and Max Abec 5 |
| Set up 2 |
Randall RII Trucks (180mm),
Abec 11 75mm - Lime, Lemon or Pink and Max Abec 5 |
| Set up 3 |
Paris Raw Trucks (180mm),
Abec 11 76mm Gumball Wheels and Codec Max Abec 5 Bearings |
| Set up 4 |
Urban Blue Trucks (180mm),
70mm Loaded Kryptonic Wheels (blue) and Codec Abec 7 Bearings |
| Setup 5 |
Deck Only |
| Set up 6 NEW! |
Randal R-2 Trucks (180mm), Orangatang InHeat and Max Abec 5 |
| Flex 2 |
42" Wide Stance |
100-180+lbs
45-82kgs |
| Flex 1 |
42" Wide Stance |
170-230+lbs
77-105kgs |
|
 |
|
| Available Options: |
| Flex: |
|
| Setup: |
|
|
